Vertix — Small Commercial Wind

M-Type Wind Turbine

300W to 500W horizontal-axis turbines for small commercial, agricultural and off-grid applications. Three models — NE-300M, NE-400M and NE-500M. NdFeB PMG, 12/24V output, start at 2.5 m/s.

At a Glance

M-Type — Key Facts

300–500W
Power Range

Three models: NE-300M, NE-400M, NE-500M. 12V or 24V output. Wheel diameter 1.35–1.65 m.

2.5 m/s
Cut-in Speed

Consistent cut-in across all three models. Rated wind speed 11–12 m/s depending on model.

HAWT
Turbine Type

Horizontal-axis turbine. Requires open sites with consistent wind direction. Yaws automatically to face wind.

12/24V
Output Voltage

Directly compatible with standard 12V and 24V battery and charge controller systems.

Vertix M-Type
Full Specification

M-Type — NE-300M / NE-400M / NE-500M

Parameter NE-300M NE-400M NE-500M
Rated Power300W400W500W
Max Power320W410W510W
Rated Voltage12V / 24V
Start Wind2.5 m/s
Rated Wind11 m/s11.5 m/s12 m/s
Survival Wind45 m/s
Wheel Diameter1.35 m1.55 m1.65 m
Blades3 or 5 pcs — Nylon fibre
GeneratorNdFeB 3-phase AC PMG
ShellAluminium alloy die-cast
ProtectionElectromagnetic / wind wheel sideways
Working Temp−40°C to 80°C
Applications & Site Requirements

The M-Type Is a Horizontal-Axis Turbine — Site Matters

Unlike the Q-Type and GV-series vertical-axis turbines, the M-Type is a horizontal-axis wind turbine (HAWT). This means it yaws to face the wind and performs best on open sites with a consistent prevailing wind direction. It is not suited to turbulent rooftop environments or urban settings where wind changes direction frequently. For those applications, the Q-Type or GV-series VAWT is the correct choice.

Rural & Peri-Urban Sites

Open Terrain with Consistent Wind

The M-Type delivers best results on pole or tower mounts at open sites — farmland, rural facilities, coastal plots and peri-urban industrial land where prevailing wind is consistent and relatively unobstructed. At these sites it provides reliable 12/24V battery charging for lighting, pumping or security loads.

Off-Grid Battery Charging

Primary or Supplementary 12/24V Source

The M-Type outputs directly to 12V or 24V battery banks via a wind charge controller, the same interface as a solar charge controller. It can operate alongside a solar panel on the same battery bank, providing generation during hours when solar output is absent or reduced. Combined generation extends battery autonomy significantly.

Telecom & Remote Monitoring

Continuous Low-Load Power

At 300–500W rated output the M-Type is suited to continuous low-load applications — telecoms repeaters, remote sensors, monitoring stations and security cameras — particularly in coastal or open-country locations where wind is reliable. The electromagnetic braking system provides automatic overspeed protection without manual intervention.

Related
Q-Type VAWT (for urban/rooftop) → Vertix GV-3KW → Solar Battery Guide → Battery Storage →
Get Started

Find the Right Wind Turbine for Your Site

Tell us about your site and power requirements — our team will confirm whether the M-Type suits your location, or recommend a VAWT if your site has turbulent or multi-directional wind.

Request Assessment WhatsApp Us