Vertix — Industrial Wind

GVH-5KW Vertical Axis Wind Turbine

5 kW rated output. 3 m rotor. 10 m tower. Cut-in at 2.5 m/s. IEC 61400-2 certified. The larger of the two Greef-manufactured GV turbines — designed for factory rooftops, industrial estates and hybrid wind-solar-BESS systems across Pakistan.

At a Glance

GVH-5KW — Key Facts

5 kW
Rated Power

5.5 kW maximum. The larger GV turbine, sized for sites with consistent wind above 3 m/s.

3.0 m
Rotor Diameter

13.5 m² swept area. 4.5 m aluminium alloy blades. Significantly larger than the GV-3KW.

2.5 m/s
Cut-in Speed

Begins generating in a gentle breeze. Runs continuously up to 25 m/s working wind speed.

20 yr
Design Life

IEC 61400-2 certified. IP54. Electromagnetic brake + PWM protection. 3-year product warranty.

Vertix GVH-5KW Wind Turbine
Full Specification

GVH-5KW Technical Data

Parameter Value
Rated Power5 kW
Max Power5.5 kW
Start Wind Speed2.5 m/s
Rated Wind Speed11 m/s
Working Wind Speed3 – 25 m/s
Safety Wind Speed50 m/s
Rotor Diameter3.0 m
Blade Length4.5 m
Blade MaterialAluminium Alloy / 3 blades
Swept Area13.5 m²
System Weight670 kg
Tower Height10 m
Generator TypeAxial Flux PMG — Coreless Disc
Rated Speed100 RPM
Start Torque< 1 N·m
Output Voltage48 – 500V
Protection MethodElectromagnetic Brake + PWM
Protection GradeIP54
Shell MaterialAluminium Alloy
Operating Temperature−40°C to 50°C
Design Life20 years
Product Warranty3 years
CertificationIEC 61400-2 • CE
Generator Technology

Coreless Disc Generator

The GVH-5KW uses an axial flux coreless outer-rotor disc PMG — direct drive, no gearbox. Removing the iron core eliminates cogging torque and magnetic drag entirely, bringing start torque below 1 N·m. The turbine begins generating at wind speeds where conventional iron-core generators are still overcoming internal resistance. With no iron-core cogging there is no vibration at the source, and noise remains low across the operating range. The coreless structure delivers a power-to-weight ratio significantly higher than conventional motor-type alternators, with a design life 8× longer.

  • Start torque <1 N·m — generates in wind that stops conventional turbines
  • No iron-core cogging — vibration-free, low-noise operation
  • Patent-pending “Precise Coil” winding technology
  • SKF bearings throughout
  • 8× longer design life vs conventional motor-type generators
Vertix GVH-5KW coreless disc generator
Solar Integration

Already Have Solar? The GVH-5KW Works With It.

Most commercial and industrial solar systems in Pakistan are under-generating for at least half of every 24-hour period — at night, in overcast conditions and during the morning and evening peaks when loads are highest but solar output is low. The GVH-5KW is designed to fill exactly that gap.

Off-Grid Systems

Add Wind to Your Battery Bank

The GVH-5KW connects to your existing battery bank via an MPPT wind charge controller — the same concept as your solar charge controller, but for wind. Your batteries now receive charge from two independent sources. When solar generation is zero, wind generation continues. The result is a more consistently charged battery bank and fewer hours running on generator.

On-Grid Systems

Feed Wind Into the Grid Alongside Solar

If your existing solar system is grid-tied, the GVH-5KW connects through an on-grid wind controller and grid-tie inverter, feeding generated units directly into your facility consumption at the same time as your solar system. Both sources offset grid import simultaneously. There is no conflict between the two — each operates on its own control path to the same inverter bus.

Hybrid Systems

Wind + Solar + BESS Together

The most complete integration: solar panels and the GVH-5KW both feed into a hybrid inverter (such as Deye or similar) alongside a BESS. The system charges batteries from whichever source is available, dispatches to load on priority, and exports surplus to grid. Wind at night charges the BESS for morning peak load. Solar during the day covers generation and tops up storage. The two sources are complementary by nature.

What You Need

Connecting the GVH-5KW to an existing solar system requires a wind charge controller or on-grid wind controller matched to the turbine output voltage, and in a hybrid setup, a hybrid inverter with a dedicated wind input or DC coupling. Charania Renewables scopes the full integration — controller selection, battery sizing, inverter compatibility and wiring design — as part of our standard assessment. No guesswork on compatibility.

Request a System Assessment
Applications

Where the GVH-5KW Is Deployed

Factory Rooftop

Industrial & Warehouse Buildings

At 670 kg the GVH-5KW requires a structural assessment before rooftop installation. Where the roof can carry the load — or where a rooftop-mounted frame is engineered — it delivers 5 kW at rated wind and continues generating through the night alongside a rooftop solar array.

Ground Mount

Industrial Estate & Factory Yard

10 m tower supplied as standard. The GVH-5KW on a ground mount at an industrial estate gives open exposure and maximum generation. Civil foundation scope is specified to your site conditions. Ground mount avoids rooftop structural requirements entirely.

Hybrid Generation Layer

Anchor Wind Source in a BESS System

Sized as the wind generation layer in a hybrid architecture. At 5 kW rated output it contributes meaningfully to a medium-sized C&I load profile. Works alongside a solar array and BESS to produce a combined generation curve with fewer zero-output hours across a full 24-hour cycle.

Related
GV-3KW — 3 kW VAWT → Industrial Energy Solutions → Battery Storage → Hybrid Engineering & Design →
Get Started

Add Wind Generation to Your Site

Share your site location and load profile — our team will assess your wind resource, check compatibility with your existing solar system, and model a hybrid generation system sized for your facility.

Request Assessment WhatsApp Us